Home > Blog

construction and demolition debris processing facilities in new york state

GEP Ecotech is a solid waste recycling solution provider. We provides a wide selection of industrial shredders and crushers to satisfy your material size reduction requirements, which feature stable performance, high production efficiency and easy maintenance. We pay attention to every detail of the machine to help you improve productivity, save energy and maximize economic benefits. In addition to standard industrial shredder and crushers, customized size reduction machines can also be offered according to your material shredding requirements. A variety of screens and rotors are selectable to achieve the best processing performance.

Chapter 33: Fire Safety During Construction and Demolition

Chapter 33: Fire Safety During Construction and Demolition

* The California Code of Regulations (CCR), Title 19, Division 1 provisions that are found in the California Fire Code are a reprint from the current CCR, Title 19, Division 1 text for the code user's convenience only. The scope, applicability and appeals procedures of CCR, Title 19, Division I remain the same. User note: About this chapter: Chapter 33 outlines general fire safety precautions ... Construction and Demolition Debris The LIU CommPost In 2010, C&D processing facilities in New York State received approximately 11.5 million tons of C&D debris and recovered approximately 6.3 million tons of material. [1] Just like New York State as a whole, LIU Post too diverted around 50% of the construction and demolition debris generated on ... Construction and Demolition Debris Recycling According to the 2014 Disposal Facility-Based Characterization of Solid Waste in California, construction and demolition (C&D) materials are estimated to account for between 21.7 to 25.5 percent of the disposed waste www.drjeandewan.beous study estimates have ranged from 29 percent in 2008 to 24 percent in 2004.. Common C&D materials include lumber, drywall, metals, masonry (brick, concrete, etc ...

Chapter VI SOLID WASTE REGULATION

Chapter VI SOLID WASTE REGULATION

In general, all solid waste management facilities in New York State require permits both for construction, and operation. ECL §27-0707; 6 N.Y.C.R.R. §360-1.7(a). “Solid waste management facility” is defined as: Any facility employed beyond the initial solid waste collection process including, but not limited to, transfer stations, baling facilities, rail haul or barge haul facilities, processing systems, Contentos - Episcopal Diocese of Central New York CONTENTOS. Contento’s is a family-run business serving all of central New York state with professional demolition, hauling, and material processing and recycling. Call ... Frequently Asked Questions about Construction and As of January 2015, a total of 86 permitted and 298 registered C&D debris processing facilities existed in New York State. All of these facilities are affected by the recently revised Part 360 regulations enacted by the New York State Department of Environmental Conservation.

State and Local Government Construction and Demolition (C

State and Local Government Construction and Demolition (C

State and Local Government Construction and Demolition (C&D) Materials Measurement Reports. Below is a collection of reports showing state-wide C&D materials amounts that were disposed and/or recycled for the year. Data is not available for all states. In some instances, the linked reports provide broader information on solid waste amounts that ... Data For Good: Mapping Construction and Demolition Waste New York State regulates construction and demolition waste (CDW)—its generation, recycling and reuse—and collects all data on CDW from private waste haulers and transfer stations/recycling facilities. There is no city source of data for CDW. Recyclables Handling and Recovery Facilities - NYS Dept Facilities which separate recyclables from construction and demolition debris are considered construction and demolition debris processing facilities subject to the requirements of Subpart 360-16. As of December 2017, there are approximately 32 permitted and 255 registered RHRFs in New York State.

NY State Senate Bill S890

NY State Senate Bill S890

Subdivision 15 of section 71-2702 of the environmental conservation law, as added by a chapter of the laws of 2020 amending the environmental conservation law relating to the disposal of construction and demolition waste and amending the penal law relating to creating the crime of scheme to defraud by disposal of solid waste, as proposed in legislative bills numbers S. 6758-B and A. 10803-A, is amended ... NY announces construction and demolition waste crackdown The vast majority of C&D debris in New York State comes from processing facilities and construction or demolition sites in New York City, where five million cubic yards of this type of waste is generated each year, the news release reported. DD - Demolition Debris AcronymAttic General information on Construction and Demolition Debris Processing Facilities in New York State, including definitions and a listing of active Construction and... C&D Debris Recycling. Construction and Demolition Debris Recycling.

Contractor Waste Material Disposal Plan

Contractor Waste Material Disposal Plan

construction and demolition debris is solid waste (including what otherwise would be construction and demolition debris) resulting from any processing technique, other than that employed at a department-approved C&D debris processing facility, that renders individual waste components unrecognizable, such as pulverizing or shredding. Also, waste contained in an illegal disposal site may be considered C&D ... Construction and Demolition (C&D) Debris - State of New York Active Solid Waste Management Facilities Construction and Demolition (C&D) Debris - Solid Waste Management Facilities Map | State of New York Skip to main content Skip to footer links Construction & Demolition Waste Manual - New York City construction and demolition (C&D) waste reduction, reuse and recycling on New York City Projects. Its basic goal is to assist design and construction professionals to prevent construction waste and to divert from landfills the C&D waste that is generated. The guidelines are addressed to all the participants

G. Frederico Wrecking Company of Rochester, NY

G. Frederico Wrecking Company of Rochester, NY

G Frederico Wrecking specializes in full-service demolition and debris disposal with a clear commitment to the satisfaction and safety of every project. Licensed and Bonded; New York State Dept. of Labor Asbestos Certification; New York State Commercial Transportation Licenses; Contact. G Frederico Wrecking 151 Bernice Street Rochester, NY 14615 Best Management Practices - New York State Department of Construction and Demolition Debris (C&D) “Exempt” disposal site encroaching on a state wetland Construction and Demolition Debris (C&D) Exceptions in Nassau and Suffolk Counties |C&D debris may only be disposed at a: zPermitted C&D Landfill. zRegistered C&D Processing Facility. |On-site burial may be permitted after notifying DEC. Construction & Demolition (C&D) Materials Management in information regarding processing and recovery. New York State: The Department of Environmental Conservation (DEC) collects data from C&D materials processing facilities that include many that process road and bridge, and land clearing materials. NEWMOA removed data from facilities that deal primarily with these materials.

Construction and Demolition Debris Recycling

Construction and Demolition Debris Recycling

According to the 2014 Disposal Facility-Based Characterization of Solid Waste in California, construction and demolition (C&D) materials are estimated to account for between 21.7 to 25.5 percent of the disposed waste stream. Previous study estimates have ranged from 29 percent in 2008 to 24 percent in 2004. Common C&D materials include lumber, ... Construction - Demolition - HSE health and safety issues during the demolition work. Site managers must ensure workers are supervised and are following safe working practice.; Sub-contractors and site workers must follow the instructions and plans given to them by those in charge of the work and ensure that their colleagues do too.; Falls from height. During demolition and dismantling, workers can be injured falling from ... New York State Department of Taxation and Finance TSB-M-05 management facility for further processing, treating, transfer or disposal.” A construction and demolition debris processing facility is “a processing facility that receives and processes construction and demolition debris by any means.” These requirements are specifically addressed in Part 360 of the DEC regulations (6 NYCRR Part 360). A waste transfer station or construction and demolition debris ...

Municipal Solid Waste and Construction & Demolition Debris

Municipal Solid Waste and Construction & Demolition Debris

Estimation processes for OOS shipments of municipal solid waste (MSW) products and the construction and demolition debris (C&D) are similar. Discussions on data and methods used in estimating volumes of shipments associated with the MSW component are presented in the first part of this Section. Similar discussions on the C&D component are then ... Handling Nonfriable Asbestos Waste in New York State As long as you do not place nonfriable category 1 or 2 asbestos containing waste (assuming that during the removal you did not make the materials friable) into an asbestos labeled bag or drum, the waste can be disposed of as construction and demolition debris in New York State. Wasted Potential: The consequences of New York City's New York City, 150 miles south, is the source of much of the construction debris dumped in the landfill, which sits less than a mile from the local public school complex and this baseball field ...

Regulations complicate C&D recycling

Regulations complicate C&D recycling

The Onondaga County Resource Recovery Agency (OCRRA), based in North Syracuse, New York, has been providing residents and businesses with a place to bring their recycling, construction and demolition (C&D) materials and trash for nearly 30 years. Data For Good: Mapping Construction and Demolition Waste NYS Department of Environmental Conservation (DEC) is responsible for the state’s solid waste management regulations, which apply to all CDW consisting of materials from the construction and demolition of buildings and infrastructure. These regulations apply to all local governments in New York State, including New York City. Comprehensive Revisions to 6NYCRR Part 360 Solid Waste MSW including landfills, composting facilities, processing facilities, and transfer facilities which ship waste out of state) 14 Part 363 Landfills • Exemptions related to disposal relocated to this Part and several new exemptions added • Limits exempt disposal of tree debris to no more than 1 acre (Outside Long Island only)

Governor Cuomo Proposes New Regulations to Prevent

Governor Cuomo Proposes New Regulations to Prevent

In addition, previously unregulated facilities, including mulch processing facilities will now be regulated. The regulations will also increase oversight of construction and demolition debris and historic fill, reducing the potential threat of these waste streams to water quality and the environment on Long Island and throughout the state. Spartan Demolition Company LLC Spartan Demolition Company LLC, located in Queens, NY is an MBE ceritified firm. We specialize in exterior demolition, interior demolition, and debris removal. Spartan has been awarded 2015 MBE contractor of the year by New York State. Our previous clients include The United Nations, St Johns University, City MD, Hunter College, Queens College, ... EREF releases analysis on national landfill - Waste Today New York State Sen. Todd Kaminsky and Assemblyman Steve Englebright have introduced S.1185A, which would require packaging producers in the state to pay for recycling. The bill states that by shifting the responsibility from local governments to corporate producers for the end-of-life disposal of packaging and paper products, recycling in the state will increase.

Issue Paper #3 Construction & Demolition Debris Recycling

Issue Paper #3 Construction & Demolition Debris Recycling

Construction & Demolition Debris Recycling 3.1 Overview Construction and demolition (C&D) debris represent a waste stream that poses materials handling challenges, yet also offers many diversion opportunities. The New York State Department of Environmental Conservation (DEC) defines C&D debris as: “uncontaminated solid waste resulting from ... eLCOSH : Health Hazards to Construction Workers During the In March and April of 1992, the New York City Department of Health and the Mount Sinai Occupational Health Clinical Center conducted two health and environmental assessments during the demolition of two tenement buildings in the Bronx, New York. The New York City Department of Housing Preservation and Development, which funded the demolition, required that the contractor cooperate with the ... Chapter 11: Solid Waste and Sanitation Services A City for disposal since New York City does not have public or private local disposal facilities such as sanitary landfills, construction and demolition debris landfills, traditional incinerators, or waste-to-energy resource recovery facilities. 1 DSNY website: http://www.drjeandewan.be/html/dsny/html/about/www.drjeandewan.be

State and Local Government Construction and Demolition (C

State and Local Government Construction and Demolition (C

New York: 2012 Beyond Waste - A Sustainable Materials Management Strategy for New York State (PDF) (282 pp, 4.25 MB, About PDF) 2006 Construction and Demolition Waste Management in the Northeast (PDF) (65 pp, 544.64 K, About PDF) North Carolina: 2013-2014 Public and Private Construction and Demolition Disposal (PDF) (2 pp, 42.03K, About PDF ... New York City Demolition Waste - R. Baker & Son All Certain solid waste cannot be categorized as construction and demolition debris. This can include asbestos, fluorescent lights, carpeting, etc. Currently, there are eighty regulated construction and demolition waste processing facilities in New York State, and 280 registered C&D waste processing facilities. State Demolition Information Large-Scale Residential Asbestos regulation in New York; Construction & Demolition Debris. Construction and Demolition Debris Processing Facilities; E-waste recycling. e-waste recycling; Lead. Lead-Safe Renovation, Repair, and Painting; Open burning. Questions and Answers Regarding Open Burning; Top of Page. North Carolina. State environmental agencies for North Carolina; Asbestos program

ESD, NYPA announce start of interior demolition

ESD, NYPA announce start of interior demolition

Sucro’s new facilities will be located on a 12.04-acre site at the Lackawanna Business Park, which will undergo environmental remediation under New York State Department of Environmental ... Best Management Practices - New York State Department of Construction and Demolition Debris (C&D) DEC and DOT allow certain types of recognizable and uncontaminated C&D debris to be: |Reused within the highway right-of-way. |Taken to “exempt” C&D disposal sites (off-site waste/spoil areas). Construction and Demolition Debris (C&D) |What is Recognizable? Debris is readily identifiable by visual observation. Issue Paper #3 Construction & Demolition Debris Recycling Construction & Demolition Debris Recycling 3.1 Overview Construction and demolition (C&D) debris represent a waste stream that poses materials handling challenges, yet also offers many diversion opportunities. The New York State Department of Environmental Conservation (DEC) defines C&D debris as: “uncontaminated solid waste resulting from the construction, remodeling,

New York City Demolition Waste

New York City Demolition Waste

Certain solid waste cannot be categorized as construction and demolition debris. This can include asbestos, fluorescent lights, carpeting, etc. Currently, there are eighty regulated construction and demolition waste processing facilities in New York State, and ... Construction and Demolition Waste Mechanical processing facility. A facility for the processing of uncontaminated rock, stone, gravel, brick, block and concrete from construction/demolition activities, individually or in combination, by mechanical or manual sizing or by mechanical or manual separation for prompt reuse shall be deemed to have a municipal waste processing permit-by-rule if it meets the requirements of subsections (a)—(c) and ... Construction Demolition Recylcing - Trash Transfer Station Demolition Material. We accept debris generated during the construction, renovation, and demolition of buildings and other projects. C&D waste often contain materials such as wood, shingles, concrete, metals, and glass. ABOUT US . Find out more information ...

Demo A to Z: A Guide to Demolition in NYC Hometown

Demo A to Z: A Guide to Demolition in NYC Hometown

There are a few different departments responsible for issuing permits and overseeing various stages of the demolition permit process, so let's break it down... Department of Buildings (DOB) Issues permits for construction and demolition activities in the City of New York; Inspects plans and sites to verify that appropriate protocols are followed New Facility Sets a High Bar for Construction Recycling in Cooper Recycling is New York City’s largest construction and demolition (C&D) recycler. The facility opened just a few months ago, so the machinery isn’t fully calibrated yet. While they currently report a 12-month recycling rate of 75 percent, 1 when they do reach full capacity, Cooper is engineered to recycle up to 95 percent of incoming material to a beneficial end use. Comprehensive Revisions to 6NYCRR Part 360 Solid Waste Construction & Demolition (C&D) Debris • Facilities that receive 250 tons on any day or greater of concrete, asphalt, rock, brick and soil (CARBS) will need permit • Expanded use of tracking forms for C&D debris transport • Lowers threshold to trigger need for registration • Adds new requirement for enclosure of mixed C&D debris processing facilities

Victory Over Proposed Athens Construction and Demolition

Victory Over Proposed Athens Construction and Demolition

ATHENS, NY—March 20, 2020 Yesterday, the Division of Materials Management Officer at the New York State Department of Environmental Conservation (NYSDEC) confirmed that Athens Stevedoring and Environmental Development LLC had withdrawn its application for a proposed Construction and Demolition waste processing facility in the Village of Athens and was no longer interested in pursuing ... Construction and Demolition Debris Processing Facilities Demo A to Z: A Guide to Demolition in NYC Hometown The demolition process in the greater New York City area is roughly a 7-step process that can take a week or longer to prep for and get the ball rolling. Learn all about the demolition process in NYC and be prepared for your project.

STATE OF NEW YORK PUBLIC SERVICE COMMISSION At a …

STATE OF NEW YORK PUBLIC SERVICE COMMISSION At a …

with DEC that any facility in New York State engaged in the separation of clean wood from C&D waste would be subject to the requirements of DEC's regulations governing C&D Debris Processing Facilities. However, since according to NiGen, generators should also be permitted to obtain eligible biomass . 3 Construction and Demolition Waste The facility shall be onsite or process less than 50 tons or 45 metric tons per day, and may not operate in violation of any State, county or municipal waste management plan. Processing and Beneficial Use. General Permits - General permits may be issued on a regional or statewide basis for C&D processing and beneficial use. The processing ... Municipally- and privately-owned landfills, and publicly Construction and Demolition Debris Landfills in New York State. Data were digitized from information supplied by the New York State Department of Environmental Conservation's Division of Materials Management/Solid Waste Management Facilities. Coordinates in UTM, ...

Licensed Private Transfer Stations and Processing Facilities

Licensed Private Transfer Stations and Processing Facilities

Construction and demolition debris: Railroad Transfer Group aka Finne 225 Railroad Ave. Bedford, NY 10507 (914) 666-0000: Construction and demolition debris: Recycling Industries Transfer Station (being operated by American Waste Transfer Systems LLC.) 306 Fayette Ave. Mamaroneck, NY 10543 (914) 698-9161: Municipal solid waste, construction and demolition debris View Document - New York Codes, Rules and Regulations This Part governs the transport of regulated waste originating or terminating at a location in New York State. Definitions applicable to this Part are found in Part 360 of this Title. For the purposes of this Part, regulated waste means any of the following types of waste: (a) Raw sewage, which includes portable toilet waste. Services : AMG Demolition AMG Demolition Inc. is a woman-owned business (WBE) in New York State specializing in demolition work for over 10 years. Based in Melville, Long Island New York and has performed demolition projects throughout Long Island, New York City, and the State. AMG Demolition Inc. is certified State and City WBE and Federal DBE.

Construction & Demolition Waste Management in the

Construction & Demolition Waste Management in the

Commercial C&D waste processing facilities are located in every NEWMOA-member state except Vermont. C&D waste processing facilities take in mixed C&D wastes and recover at least a portion of the material. However, there is wide variability in how wastes are handled at these facilities and the quantity and types of materials that they recover.

Contact US

Factory Address: Industry Zone, Zhengshang new district, Zhengzhou, China

Email:inquiry@gepecotech.com

Tel:+86-15838176062

Whatsapp: +86-15838176062


Request Quote

As a waste recycling solutions provider, we can provide different styles of industrial shredders to suit client-side recycling demands on different materials. Clients can choose our shredders according to the structure and applications.

How to Get a Customized Solution?

Don't worry, we will help you design a one-stop solution, providing you with satisfactory service.

REQUEST A QUOTE RIGHT NOW+

Shredding & Recycling Solution for Different Materials

Benefiting from deep technical strength and years of accumulated experience, GEP Ecotech optimizes the processing technology of different materials to help users improve production capacity, reduce costs, improve safety, and increase profitability.